# Oscillating Dipole Above Conducting Plane (emOscDipoleAboveConductor.sdf)

Keywords:

emOscDipoleAboveConductor, radiation

## Problem Description

This problem consists of an infintesimally short dipole located a variable height and orientation above a conducting plane. This simulation consists of electric and magnetic fields that can be visualized to see how the distance between, and orientation of the dipole relative to the antenna effects these fields.

This simulation can be performed with a VSimBase license.

## Opening the Simulation

The Dipole Above Conducting Plane example is accessed from within VSimComposer by the following actions:

• In the resulting Examples window expand the VSim for Basic Physics option.
• Expand the Basic Examples option.
• Select Dipole Above Conducting Plane and press the Choose button.
• In the resulting dialog, create a New Folder if desired, and press the Save button to create a copy of this example.

All of the properties and values that create the simulation are now available in the Setup Window as shown in Fig. 118. You can expand the tree elements and navigate through the various properties, making any changes you desire. The right pane shows a 3D view of the geometry, if any, as well as the grid, if actively shown. To show or hide the grid, expand the Grid element and select or deselect the box next to Grid.

Fig. 118 Setup Window for the Dipole Above Conducting Plane example.

## Simulation Properties

This example includes several constants for easy adjustment of simulation properties, Including:

• AMPLITUDE: The amplitude of the dipole current
• FREQUENCY: The operating frequency

There is also a SpaceTimeFunction to define the current driver of the dipole source

Other properties of the simulation include open boundaries on all sides except for the lower x boundary, which is a perfect electric conductor. A Dipole Current source is used to set the location of the dipole source.

## Running the Simulation

After performing the above actions, continue as follows:

• Proceed to the Run Window by pressing the Run button in the left column of buttons.
• To run the file, click on the Run button in the upper left corner of the Logs and output Files pane. You will see the output of the run in the right pane. The run has completed when you see the output, “Engine completed successfully.” This is shown in Fig. 119.

Fig. 119 The Run Window at the end of execution.

## Visualizing the Results

After performing the above actions, continue as follows:

• Proceed to the Visualize Window by pressing the Visualize button in the left column of buttons.

The electric and magnetic field components can be found in the scalar data variables of the data overview tab. To create the plot shown in Fig. 120 do the following:

• Expand Scalar Data
• Expand E
• Select E_y
• Select the box next to Display Contours and set the # of contours to 12
• Select the box next to Clip All Plots
• Rotate the plot by clicking and dragging your mouse

Fig. 120 The electric field

## Further Experiments

In this example the “infinite” electric conductor is simulated by a physical conducting boundary at the bottom of the simulation. It would be possible to achieve the same results by having a second, equal infintesimal dipole placed the same height “below” the conducting plane.

The number of “lobes” visible in the far field is dependent on Antenna Orientation and height. If vertically oriented there will be 2*Height/Wavelength +1 lobes.A horizontally oriented dipole will produce 2*Height/Wavelength lobes. This can be a bit difficult to visualize using just E-field data as it must be properly thresholded. The lobes will be easier to see in the example Advanced Dipole Above Conductor, a part of the VSimEM package.