Half-wave Antenna (halfWaveAntenna.sdf)

Keywords:

electromagnetics, antennas

Problem Description

The half wave antenna example describes a simple box source in a vacuum.

This simulation can be performed with any license.

Opening the Simulation

The Half Wave Antenna example is accessed from within VSimComposer by the following actions:

  • Select the NewFrom Example… menu item in the File menu.
  • In the resulting Examples window expand the VSim for Basic Physics option.
  • Expand the Basic Examples option.
  • Select Half Wave Antenna and press the Choose button.
  • In the resulting dialog, create a New Folder if desired, and press the Save button to create a copy of this example.

All of the properties and values that create the simulation are now available in the Setup Window as shown in Fig. 133. You can expand the tree elements and navigate through the various properties, making any changes you desire. The right pane shows a 3D view of the geometry, if any, as well as the grid, if actively shown. To show or hide the grid, expand the Grid element and select or deselect the box next to Grid.

Setup Window

Fig. 133 Setup Window for the Half Wave Antenna example.

Simulation Properties

This example includes several constants for easy adjustment of simulation properties, Including:

  • WAVELENGTH: The wavelength of the antenna

There is also a SpaceTimeFunction to define the current driver of the half wavelength source.

Other properties of the simulation include port boundaries on all sides except for the lower x boundary, which is a perfect electric conductor. A Distributed Current source is used to set the current of the half wavelegth source.

Running the Simulation

After performing the above actions, continue as follows:

  • Proceed to the Run Window by pressing the Run button in the left column of buttons.
  • To run the file, click on the Run button in the upper left corner of the Logs and Output Files pane. of the window. You will see the output of the run in the right pane. The run has completed when you see the output, “Engine completed successfully.” This is shown in Fig. 134.
Run Window

Fig. 134 The Run Window at the end of execution.

Visualizing the Results

After performing the above actions, continue as follows:

  • Proceed to the Visualize Window by pressing the Visualize button in the left column of buttons.

To view the field pattern as shown in Fig. 135, do the following:

  • Expand Scalar Data
  • Expand B
  • Select B_y
  • Select Display Contours and set the # of Contours to 100
  • Move the dump slider forward in time
  • Rotate the plot by clicking and dragging with your mouse.
image 1

Fig. 135 Visualization of the wave pattern as a color contour plot.

Further Experiments

Additional experiments worth investigating are:

  • Change the frequency of the source.