Laser Plasma Accelerator (laserPlasmaAccel.sdf)

Keywords:

Laser Plasma Accelerator

Problem description

This example demonstrates the use of VSim to simulate a simple laser-plasma accelerator problem using the full PIC algorithm.

An intense, short laser pulse propagating through a plasma can lead to the separation of electrons and ions capable of producing accelerating electric fields of hundreds of GV/m [GTVT+04]. VSim is capable of simulating laser plasma accelerators (laserPlasmaAccel) using several different models: envelope, fluid and full particle-in-cell (PIC).

Here we look at the full PIC model with a 1-mm long plasma with uniform density of \(1.e25 \mbox{ m}^{-3}\). A gaussian laser pulse, defined by the transverse electric field

\[E_y = E_0 (0.5-0.5 \cos(\pi t/T)) H(T - t) \exp(-(y^2+z^2)/(w_0^2 D_y D_z)) \cos(\omega t + \phi_y + \phi_z)\]

where \(w_0\) is the radius at which the wave amplitude drops to \(1/e\), \(T\) is the temporal duration of the pulse,

\[\begin{split}D_y = 1 + (F/Z)^2 \\ D_z = 1 + (F/Z)^2\end{split}\]

are the squares of amplitude reductions from being the launching at a distance, \(F\), from the focus, \(Z\) is the Rayleigh length, and

\[\begin{split}\phi_y = - (F/Z) (y/w_0)^2 / D_y \\ \phi_z = - (F/Z) (z/w_0)^2 / D_z\end{split}\]

are the Gouy phases.

The laser is launched from the left side of the box. The laser amplitude is determined through the normalized vector potential \(A_0 = e E_0/\omega m_e c\), where \(\omega\) is the laser angular frequency.

The simulation setup consists of an electromagnetic solver using the Yee algorithm. The laser pulse is launched from the left side of the window using the pre-defined gaussian pulse launcher at the left boundary. Simple conducting boundary conditions are used at the top and sides. As such, one must ensure that waves reflected off the top or bottom do not get into the simulation, and that no waves hit the right boundary to be reflected back into the simulation.

The plasma is represented by macro-particles which are moved using the Boris push. The particles are variably weighted to represent the density ramp.

The input file allows one to set up plasma and laser parameters. The simulation box size is determined as a function of the laser length and spot size. The resolution was set to have about 24 cells per wavelength longitudinally and 3 transversely. The time step is chosen to be very close to the courant condition limit in order to have good dispersion.

This simulation can be performed with a VSimPA license.

Opening the Simulation

The Laser Plasma Accelerator example is accessed from within VSimComposer by the following actions:

  • Select the NewFrom Example… menu item in the File menu.
  • In the resulting Examples window expand the VSim for Plasma Acceleration option.
  • Expand the Introductory Examples option.
  • Select “Laser Plasma Acceleration” and press the Choose button.
  • In the resulting dialog, create a New Folder if desired, and press the Save button to create a copy of this example.

All of the properties and values that create the simulation are now available in the Setup Window as shown in Fig. 444. You can expand the tree elements and navigate through the various properties, making any changes you desire. The right pane shows a 3D view of the geometry, if any, as well as the grid, if actively shown. To show or hide the grid, expand the Grid element and select or deselect the box next to Grid.

laserPlasmaAccel screen shot, setup

Fig. 444 Setup Window for the Laser Plasma Acceleration example.

The Setup Window shows a very long simulation. However, the full length is not simulated at any one time. Instead a moving window is used to simulate only the region where dynamics is occurring. The length seen in Fig. 445 is that of the electron loader.

laserPlasmaAccel screen shot, setup

Fig. 445 Zoom of Setup Window for the Laser Plasma Acceleration example showing size of grid.

To see the grid size, one can expand Particle DynamicsKineticParticleselectrons0 and unclick particleLoader. If one wishes to simulate this for longer distances, one can set the Parameter, NUM_XLENGTHSS, to a larger number; 400 is more than enough.

Running the simulation

After performing the above actions, continue as follows:

  • Proceed to the Run Window by pressing the Run button in the left column of buttons.
  • To run the file, click on the Run button in the upper right corner of the window. You will see the output of the run in the right pane. The run has completed when you see the output, “Engine completed successfully.” See Fig. 446.
laserPlasmaAccel screen shot, run

Fig. 446 The Run Window at the end of execution.

Running in 2D, this simulation uses around 225,000 cells and nearly 200,000 particles for 20,000 time steps. The run takes about an hour on a 4-core 2.5 GHz I7.

Visualizing the results

After performing the above actions, click on Visualize in the column of buttons at the left. For all plots, it is useful to keep Auto Reset on so that the window moves with the data.

To view the electric field, switch to Field Analysis in the Data View drop-down menu. From the Field drop-down menu, choose the desired component of the electric field, E. The depField field is the current density. See Fig. 447.

laserPlasmaAccel image 1

Fig. 447 The output of the run shows the accelerating field \(E_x\) after about 2 picoseconds.

The acceleration of the particles can be seen by viewing the (\(x\)) component of the velocity. To do this, switch to the Phase Space Data View in VSimComposer and set the X-axis variable to electrons0_x, and the Y-axis variable to electrons0_ux. Then click Draw. You will see a color-coded picture of particle velocity like in Fig. 448.

laserPlasmaAccel image 2

Fig. 448 Phase-space plot of plasma electrons at t = 2.1 picoseconds.

Further Experiments

Try increasing or decreasing the intensity of the laser pulse through the parameter A_0 and see the effect on the shape of the plasma wakefield.